Installation Guide - Car and Driver CDC-646 Manual De Usuario

button to move on to the next option and save changes
when done.
NOTE:
Be sure to set the time and date immediately when setting up your
device; if you don't, you will not have the correct incident data if
you get into an accident.

Installation Guide

Make sure that your vehicle is parked, and the
•
engine is not running.
Mount the Dash Cam onto your windshield.
•
Remove the stickers from the adhesive car cable clips
•
to expose the adhesive. Then, firmly press along the
edge of the windshield to avoid obstructing the
drivers view.
Plug the car adapter into the cigarette lighter socket.
•
Next, place the cable into the adhesive car cable clips.
Finally, connect the Micro USB connector to the Dash
Cam.
Check the Dash Cam to ensure that it is recording the
•
portion of the road you desire. If it is not, adjust
accordingly.
Start your engine and double check that the device is
•
installed and functioning properly.
NOTE:
The Red LED indicator on the right of the screen will light up
if the device is installed properly. The device will start
recording automatically, and the indicator will begin flashing.
Pay attention to the image on the LCD panel. If the image is
inverted contact us immediately.
8
The Red LED indicator on the right of the
screen will light up if the device is installed
properly. The device will start recording
automatically, and the indicator will begin