GE Profile 26 Manual Del Propieratio E Instalacion página 5

Ocultar thumbs Ver también para Profile 26:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Screen
functions,
ge.com
O FfiEEZEfi Button
Up andDownArrows
to settemperature
WATER
FILTER: GOOD
Home Screen
FREEZER Temperature:
To change the freezer compartment temperature, press the FREEZER
button and use the UP or DOWN arrow keys until the desired temperature
appears on the screen. PressSAVEto confirm the selection. The control
will display both the actual and set temperature until the set temperature
is reached. The actual temperature may vary slightly from the SET
temperature, based on usage and operating environment.
Each time you adjust the controls, allow 24 hours for the refrigerator
to reach the set temperature.
SAVE Button
Upand DownArrows
to settemperature
_
FRESH FOOD Button
WATER
FILTER: GOOD
FRESHFOODCompertment Temperature:
To change the fresh food compartment temperature, press the FRESH
FOOD button and use the UPor DOWN arrow keys until the desired
temperature appears on the screen. PressSAVEto confirm the selection.
The control will display both the actual and set temperature until the set
temperature is reached. The actual temperature may vary slightly from
the SETtemperature, based on usage and operating environment.
Each time you adjust the controls, allow 24 hours for the refrigerator
to reach the set temperature.
SAVE Button
12:00 PM
WATER
FILTER: GOOD
T
DISPENSER Button
Dispenser
WATER optionchosen
LIGHT Button
WATER
FILTER: GOOD
DISPENSER:
The refrigerator can dispense water, crushed ice or cubed ice through
the dispenser.To make a selection, press the DISPENSER button and
choose WATER, C RUSHEDICEor CUBEDICE.After the selection has
been made, press a glass against the dispenser paddle.
NOTE:The DISPENSER button is available from almost every feature
screen.
Dispenser L IGHT:
The dispenser light default setting is OFF.When the dispenser paddle
is pushed, the light automatically comes on (off after 5 seconds when
pad is released).To turn the light on manually, press the LIGHT button.
The dispenser light will stay on until the LIGHTbutton is pressed again.
LOCK:
To prevent accidental use of the control or dispenser,the control is
equipped with a lock feature. When locked, the dispenser and LCD
functions are not available. Pressand hold the LOCKbutton for
3 seconds to lock or unlock the dispenser.
LOCK
Locked
Unlocked
LOCK Button
Press andHoldfor
3 seconds to Lock
or Unlock

Publicidad

Tabla de contenido
loading

Tabla de contenido