External Video Component; Using Av Input - Pioneer AVH-X8800BT Manual De Instalación

Connection
1 Hook
2 Lock tie
3 High Speed HDMI Cable
®
CAUTION
Do not tighten up the lock tie more than necessary.
Camera
When you use the rear view camera, the rear view image is
automatically switched from the video by moving the gearstick
to REVERSE (R). Camera View mode also allows you to check
what is behind you while driving.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR
VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR
DAMAGE.
CAUTION
 The screen image may appear reversed.
 With the rear view camera you can keep an eye on
trailers, or back into a tight parking spot. Do not use for
entertainment purposes.
 Objects in rear view may appear closer or more distant
than in reality.
 The image area of full-screen images displayed while
backing or checking the rear of the vehicle may differ
slightly.
8
2
b
2
1
3
5
4
6
1 Rear view camera (ND-BC8) (sold separately)
2 To video output
3 RCA cable (supplied with ND-BC8)
4 This product
5 Brown (BC IN)
6 Power supply
7 Power cord
8 Violet/white (REVERSE-GEAR SIGNAL INPUT)
 Refer to Power cord on page 3
9 Yellow (VIDEO INPUT) 15 cm
a RCA cable (sold separately)
b View camera (sold separately)
p Connect only the rear view camera to BC IN. Do not connect
any other equipment.
p Some appropriate settings are required to use other view
cameras.
 Refer to the operation manual.

External video component

a

Using AV input

9
4
7
8
7
9
1 This product
2 Yellow (VIDEO INPUT) 15 cm
3 Red, white (AUDIO INPUT) 23 cm
4 To Yellow
5 To Red, white
6 RCA cables (sold separately)
7 To video output
8 To audio outputs
9 External video component (sold separately)
p The appropriate setting is required to use the external video
component.
 Refer to the operation manual.
1
2
5
3
6
8