Connecting The Projector To Other Devices; Before Connecting; This Projector Can Be Connected To; Connecting The Power Cord - Sharp PG-A10X Manual De Instrucciones

Connecting the Projector to Other Devices

Before Connecting

Note
• Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
• Be sure to read the operation manuals of the devices to be connected before making connections.

This projector can be connected to:

A computer using:
I An RGB cable and a ø3.5 mm audio cable (commercially
available) (See page 16.)
I A DIN-D-sub RS-232C adaptor and an RS-232C
serial control cable (AN-C10RS) (sold separately)
(See page 20.)
Component video or audio-visual equipment:
I A VCR, Laser disc player or other audio-visual
equipment (See page 18.)
I A DVD player or DTV
*
DTV is the umbrella term used to describe the new
digital television system in the United States.
Connecting the Power
Cord
Plug the supplied power cord into the
AC socket on the rear of the projec-
tor.
A10X_A10S#E_Print#p15_20.p65
*
decoder (See page 19.)
15
Supplied
accessory
03.2.4, 2:02 PM
Power cord
15