Nidec LEROY-SOMER ID-SIZE1 Instalación Y Conexión página 11

Step 3: The keypad can be easily rotated at any desired angle if needed. To achieve this,
unscrew the nut located under the cover (3 a ), then rotate the keypad (3 b ) at the required
angle. Screw the nut again until the keypad is held firmly in place on the cover.
Step 4: Connect RJ45 cable of the option to Commander ID300/302 connector.
Size 1 or 2
Installation and connections
5678 en - 2018.10 / b
ID-SIZE1- Keypad - ID-SIZE3-Keypad
3
a
3
b
Size 3
11