Before First Use - Klarstein BellaVita Manual De Instrucciones

EN
16

BEFORE FIRST USE

• Put the milk tank assembly into the machine and plug in.
• Fill max 1400 ml water into the water tank
• Press to power on. All buttons on the control panel will flash simultaneously.
Press any button to pump the water into the pipeline till the white lighting turns off.
Pre-heating mode begins.
• Once the temperature reaches the default setting, the lighting stops flashing and the
unit beeps
AUTO PROGRAMMES
(1) Single cup espresso brewing
• Place the single cup filter insert in sieve holder.
• Use the coffee spoon to fill single cup filter with fine ground espresso coffee,
approximately one spoon for single cup filter. Press the coffee powder down into
the filter, using the flat end of the measuring spoon to help .
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the single cup button.
• The button will be illuminated white and the solenoid pump will start water
pumping.
• The brewing cycle will complete once the unit beeps once.
(2) Double cup espresso brewing
• Place the double cup filter insert in sieve holder.
• Use the coffee spoon to fill double cup filter with fine ground espresso coffee,
approximately one and a half spoon for double cup filter. Press the coffee powder
down into the filter, using the flat end of the measuring spoon to help .
• Insert sieve holder in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head. Press the double cup button.
• The button will be illuminated white and the solenoid pump will start water pumping.
• The brewing cycle will complete once the unit beeps once.
(3) Cappuccino Brewing
• To detach the milk tank assembly, carefully hold the milk tank by one hand, and
press the button on right side of milk tank cover by another hand to remove the milk
tank assembly, gently move out the milk tank assembly to the side at the same time.
• Remove the milk tank cover by pressing the release button on the side of the milk
tank cover, flipping it up to one side and taking it off.
• Add the milk into the milk tank. Always fill the milk beneath the max mark. The
suggested temperature for milk is 4-8 °C.