Bosch AdvancedMulti 18 Manual Original página 20

20 | English
Application tool
HCS plunge cut
saw blade for wood
Bi-metal plunge cut
saw blade for hard-
wood
TC plunge cut saw
blade, metal
Bi-metal plunge cut
saw blade for wood
and metal
TC-Riff segment
saw blade
Diamond-Riff seg-
ment saw blade
TC-Riff Delta plate Mortar, concrete residue,
TC-Riff grout and
mortar remover
HCS multi blade
Scraper, fixed
Scraper, flexible
Bi-metal segment
serrated blade
1 609 92A 4N1 | (12.10.2018)
Material
non-hardened nails and
screws
Wood-based materials,
soft plastics
Hardwood, laminated
boards
Metal, extremely abrasive
materials, fibreglass, plas-
terboard, cement-bonded
fibreboard
Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and
screws
Cement joints, soft wall
tiles, fibreglass-reinforced
plastics, porous concrete
Cement joints, soft wall
tiles, epoxy resin, fibre-
glass-reinforced plastics
wood, abrasive materials
Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, abrasive
materials
Roofing felt, carpets, arti-
ficial turf, cardboard, PVC
flooring
Carpets, mortar, con-
crete, tile adhesive
Carpet adhesive, paint
residue, silicone
Insulation material, insula-
tion boards, floor panels,
impact sound insulation
boards, cardboard, car-
pets, rubber, leather
Application
Delicate adaptation work in wood;
example: Sawing recesses for locks and fittings
Separating cuts and plunge saw cuts;
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Thin plunge cut in solid wood for installing a
ventilation grille
Plunge cuts in laminated boards or hardwood;
example: Installation of skylights
Plunge cuts in extremely abrasive materials or metal;
example: Cutting kitchen front covers, easy cutting
through hardened screws, nails and stainless steel
Plunge cuts in laminated boards or hardwood;
example: Shortening door frames, recesses for a shelf
Making cuts near edges, in corners or in difficult-to-reach
areas;
example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics
Precise routing and cutting of tile/joint material, epoxy
resin and fibreglass-reinforced plastics;
example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic
Rasping and sanding on a hard surface;
example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue
Routing and cutting of joint material and tile material, as
well as rasping and sanding on a hard surface;
example: Removing tile adhesive and joint mortar
Fast and precise cutting of soft material and flexible abras-
ive materials;
example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.
Scraping on a hard surface;
example: Removing mortar, tile adhesive, concrete
residue and carpet adhesive residue
Flexible scraping on a soft surface;
example: Removing silicone joints, carpet adhesive
residue and paint residue
Precise cutting of soft materials;
example: Cutting insulation boards to size, cutting pro-
truding insulation material to length so that it is flush with
the surface
Bosch Power Tools