Multi-Functional Mobile Keypad Recognition Programming - hager S771-22X Manual De Instalación

Recognition programming

Multi-functional mobile keypad recognition programming

• 1 st possibility for use
Press the Press and hold the
external receiver
Light ON
programming
or
key (for less
Socket ON
than 2 sec.).
The programming
LED will light
up temporarily.
external receiver
programming LED
If the Light or Socket keys are then re-programmed for
Toggle Switch mode, the keypad must be programmed
again (see keypad with touch screen manual).
If you make a programming error, the programming LED will flash quickly. You must carry out the programming
sequence again from the start.
The
external receiver
confirms
programming
by its
programming
or Opening
LED lighting
, and
up for 2 sec.
key until the
lights up.
• 2 nd possibility for use
The Light page
programmed for direct access (see Keypad
installation manual).
Press the
external receiver
programming
key (for less
than 2 sec.).
The programming
LED will light
up temporarily.
125
access key must first be
Press and hold the
external receiver
confirms
key on the Light
programming
page until the
external receiver
programming
programming LED
LED lighting
lights up.
up for 2 sec.
The
by its
G
B