Eos Wireless converge Serie Manual Del Utilizador página 4

Eos Loudspeaker Connection
Amplified Receiver Wire Connection
Follow the diagram below to connect your speakers to the Eos Converge Amplified Receiver.
1. Use your thumb or fingers press the spring-loaded terminal tab to open the connec-
tion hole, once the stripped portion of the wire is in the securely in the hole, release
the terminal tab. The wire should be caught firmly in the connector hole.
2. Connect the stripped end of gold colored wire to the speaker terminal hole marked
"+" (red). Insert the stripped end of silver colored wire to the speaker terminal hole
marked "-" (black)
3. To help obtain a better connection, it is important to pull slightly the wires after these
have been secured in the terminals. This will cause the teeth inside the connectors to
'bite' into the wire.
Note - Mismatching of polarities will result in a distorted sense of sound direction. If this occurs,
re-check the wiring.
RIGHT SPEAKER
AMPLIFIED RECEIVER
4
LEFT SPEAKER