Publicidad
English
GENERAL CONSIDERATIONS
- For your column to function correctly, the
water supply pressure must not be higher
than 5 bar or lower than 2 bar. For safety
reasons, however, it must not exceed 55ºC.
Always respect these limits. If the pressure or
temperature of the water is higher, the
column could be damaged. On the other
hand, if the pressure of the water is lower,
your column may not function correctly.
- The thermostatic tap regulates the
temperature by activating the thermostatic
cartridge. If the boiler switches off too often
and cold water comes out when using any of
the functions of the column, clean the filters of
the thermostatic taps and, if the problem
persists, reduce the temperature of hot water
coming from the boiler or heater with the
appropriate control on the device. In all
cases, consult the technical characteristics
of the boiler.
HYDROMASSAGE
Before a hydromassage: If you have not
used a certain function of your
hydromassage for some time, the anti-
limescale injectors should be checked as
indicated in the hydromassage maintenance
instructions.
Pressure of the water jet: Regulate the
water flow for a more or less powerful
massage. Combinations of the type and
duration of massage and the temperature of
the water enable you to adapt the
hydromassage to your requirements.
In general, the intensity of the water jet has
the following effects:
-Greater intensity: toning effects
-Less intensity: relaxing effects
The hydromassage should never be
excessively strong.
Temperature of the water: We recommend
that this be between 30 ºC and 39 ºC:
Hydromassage:
-Cold (30 - 35ºC). With mainly toning effects.
-Neutral (36 - 37ºC). For relaxing effects.
-Hot (38 - 39ºC). For muscular applications.
YDRA
Thermostatic tap: You can select the desired
temperature by means of the "temperature
indicator control". Turn the on-off control until you
reach the desired water flow rate. The water will
be at the temperature you have selected.
On the "temperature indicator control", there is a
safety button that prevents temperatures over
38ºC being selected by mistake. If you want a
higher temperature, press the button to unblock
this safety mechanism.
Hydromassage process:
Select the desired function using the function
selector, which permits the following options:
• Ydra shower columns have a jet, which
can be adjusted to select three types of
massage.
• Jet-spray massage: A spray water jet for
relaxing massage, recreating an
atmosphere similar to that of a Turkish bath.
•
Vertical massage standing: region dorsal,
thighs and legs / Vertical massage seated:
region cervical, dorsal and legs.
•
Vertical massage: region cervical, dorsal
and thigh.
Ydra shower columns have a news jets, which
can be adjusted to select three types of massage:
Jet-spray massage: a spray water jet for relaxing
massage, recreating an atmosphere similar to
that of a Turkish bath.
Simple massage and soft at low pressure: for a
massage with a refreshing and stimulating
effect,an atmosphere similar to that of a soft
shower.
Pulsating massage: carried out by intermittent
jets, for a massage that relaxes and loosens tense
muscles.
Turn the jets in the most appropriate direction,
though you can later change it to direct the water
jets onto whatever parts of the body you want.
•Adjust the temperature of the water, checking it at
the foot-level outlet.
•Select the appropriate function.
•Turn the water on progressively until you obtain
the most appropriate hydromassage pressure.
9
Publicidad
