General Information; Installing The Batteries; Automatic Operation - Hozelock AC1 2705 Manual De Instrucciones

G

GENERAL INFORMATION

- This product meets the requirements of Pollution Degree 4
and therefore can be used in exposed weather conditions.
- This product is not suitable for supplying drinking water.
- Threaded water connections are suitable for hand tightening
only.
- This product should only be fitted to a mains water supply.
- Please follow the instructions to make sure that you get the most
from your timer for simple and efficient watering.
Please follow the instructions to make sure that you get the most
from your timer for simple and efficient watering.

INSTALLING THE BATTERIES

You must use Alkaline batteries - alternatives will result in
incorrect operation.
1. Remove screws and back cover.
2. Insert two 1.5V 'C' Alkaline batteries. (Check + and - are
correct.). IMPORTANT: Rechargeable batteries must not be used.
3. Replace batteries each season. (max 12 months use)
MAINTAINING THE WATERPROOF SEAL
1. Ensure that rubber seal is positioned correctly.
2. Replace back cover and screw down tightly.
3. Repeat each time back cover is removed.
HOW TO PROGRAMME THE TIMER
There are two watering operations - Automatic and Manual.

AUTOMATIC OPERATION

Automatic ON
1. Turn dial clockwise to AUTO START at actual desired start time
(e.g. To start watering each day at 15H00 you must set your AC1
when the actual time of day is 15H00). The timer has now
memorised the auto start time until it is reset and will operate
every day at this time. Use of manual ON or OFF does not cancel
memory.
2. Turn dial anti-clockwise to:
a) Chosen duration for once-a-day operation, or
b) Chosen programme for all other watering frequencies (see
table). The timer will now automatically run the selected
program repeatedly until a new option is selected.
1