Special Settings - Becker BOM 850C-II Manual De Instrucciones

Special settings

Open the special settings menu
1. Keep the programming button (PROG button) (D) pressed in for approximately 3 seconds. The number "3" is
displayed.
2. Press the programming button (PROG button) (D) again. The number "4" is displayed.
3. Keep the programming button (PROG button) (D) pressed in again for approximately 3 seconds. The number
"5" is displayed.
Menu 5 + Menu 6:
Force limitation for Open and Close.
Warning:
If the setting is too high, persons may be placed at risk of injury.
In the delivery state, the set value is "6" when opening and "4" when closing. We recommend
selecting the appropriate door type in menu 8 before the force learning cycle.
1. Select menu item "5".
After approximately 2 seconds, the display fl ashes and the set value of the power limit for upward motion
appears.
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) buttons.
3. Press the programming button (PROG button) (D).
The number "6" is displayed. After approximately 2 seconds, the display fl ashes and the set value for the
power limit for closure appears.
4. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) buttons.
Warning:
The force on the main closure side must not exceed 400 N / 750 ms!
5. Press the programming button (PROG button) (D).
The number "7" is displayed.
Installation
43