HeiTel CamServer 2c Guía De Instalación Rápida página 25

HeiTel Digital Video GmbH - Quick Installation Guide CamServer 2c
Transmitting
parameters
CamServer 2c
E-Plus: 1,"IP","internet.eplus.de"
■
o2: 1,"IP","surfo2"
■
Dial in number: The standard dial in number for Internet connections via
■
3G/UMTS or GPRS is *99#. Depending on the mobile telephone provider it
may be necessary to enter *99*1# or *99***1# as dial in number.
The parameters listed here will often need to be configured with different
data, depending on the provider.
For example in the case of access data (User
are providers by which these entries can remain empty, whereas others
require a definite or indefinite entry.
Always contact your mobile phone provider with regard to current access
data.
Initialisation command
■
ATE0V1&D2&C1S0=0+IFC=2,2 generally ensures correct initialisation of
the internal 3G/UMTS modem.
Initialisation command
■
provider-dependent adjustment of the internal 3G/UMTS modem where
necessary.
Reset Adapter every: This drop-down list menu allows you to specify
■
how often you want to reset the internal 3G/UMTS modem. Certain
installations may require the internal 3G/UMTS modem to be reset at
periodic intervals in order to ensure the availability of the device. Please
note that this interval is reset after each connection and that the adapter
cannot be reset during active connections.
With recording pause: Select this option to pause the recording of
■
image data during resetting of the adapter.
MTU (Maximum Transmission Unit): This setting is provider-dependent,
■
standard value: 1500
MRU (Maximum Receive Unit): This setting is provider-dependent,
■
standard value: 1500
To conclude parameter settings, confirm the change made using OK, so that
the data is transmitted to the device.
For detailed information on device parameterisation, if necessary please
consult Chapter 7 of the CamControl
name and Password) there
1: The predefined command sequence
2: A further command sequence enables further
LITE software manual.
25