Mark COB SPOT 100 Instrucciones De Usuario página 7

Main Menu
DMX address setting
Edit
RGBW adjustment
RGB adjustment
Note output default setting address code is A001, pan is positive circumrotate, tilt is positive
circumrotate, LED positively reveal.
Master/slave mode(auto-running sound control)
.This mode will allow you to link up 32 units together without a controller.
.Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of
the units.Proper performance it may be necessary to use a terminator at the last fixture.
COBSPOT 100
Auto mode
Auto mode
Setting
RGBW
RGB Auto mode select and other mode
User Manual/Manual de uso
Sound mode
ID select
color temperature select
Auto mode select and other mode
Page 5
EN
Mode select
Temperature protection