Technical Description; Mounting And Connecting - Indel B TB25AM Instrucciones Para El Uso

TB25AM
TROUBLESHOOTING
Should the refrigerator start to work poorly, before getting in touch with our service office, make sure that:
a) the power supply is connected,
b) connections and polarity have been effected properly
c) the air inlet and outlet are not blocked
d) the refrigerator is not near a heat source
e) the fuse of the power supply line has not blown.

TECHNICAL DESCRIPTION

- The refrigerator can cool products, and keep them cool. Cooling is performed by a CFC-free cooling
circuit, which requires no maintenance, and a compressor.
- The refrigerator has an automatic battery control device, which protects the lorry battery against excessive
running out during the connection to the lorry 12/24 V power network.
- If the refrigerator is started up while the lorry engine is not running, it will go off automatically as soon
as the power supply voltage goes below a set threshold. The refrigerator will not start up again until the
restart voltage – obtained by charging the battery – has been reached.

MOUNTING AND CONNECTING

The refrigerator fits into the stowage compartment under the bed.
- Lift the mattress
- Unscrew the 4 screws and take the panel out.
- Take the stowage compartment out and remove the
container.
- After installing the refrigerator, the stowage com-
partment may be put back in place.
TB25AM_09-2017
ENGLISH
15