Tabla de contenido
Publicidad
Instale las ruedas (cont.)
Con la lengüeta del buje orientada hacia la ranura del marco inferior, apriete las
patas del buje y empuje hasta que la lengüeta encaje en la ranura del marco
inferior.
8.
Install the Door Panels
Roller
Rouleau
Rueda
Inside Rail
Rail intérieur
Riel interior
Position handle toward
inside of shower.
Positionner la poignée
vers l'intérieur de la douche.
Coloque la manija hacia
el interior de la ducha
Inside Panel
Panneau intérieur
Panel interior
Inside of Shower
Intérieur de douche
Interior de la ducha
NOTE: Perform these installation steps from outside the bath/shower.
Install the Inside Panel
Lift the inside door panel with the rollers facing away from you.
Position the rollers on the inside rail of the top track.
Position the bottom of the door panel in the bottom track guide.
Check the panel for proper alignment and smooth operation. Adjust as needed
(directions below).
After adjusting, align the inside panel with the wall jamb on the showerhead side
of the bath/shower.
Adjusting the Rollers
Remove the door panel.
Loosen the roller screw(s) and move the roller(s) in the slot to align the panel.
Sterling
Roller
Rouleau
Rueda
Top Track
Rail supérieur
Carril superior
17
Top Track
Rail supérieur
Carril superior
Outside Rail
Rail extérieur
Riel exterior
Outside Panel
Panneau extérieur
Panel exterior
Bottom Track Leg
Pied de rail inférieur
Pata del carril inferior
Outside of Shower
Extérieur de douche
Exterior de la ducha
1063217-2-F
Publicidad
Tabla de contenido
