Cycle Modifier Buttons; Add Garments - LG WT5101H Serie Manual Del Propietário

H O W TO U S E

CYCLE MODIFIER BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons.
Press the button for that setting until the indicator
light for the desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the tub in some cycles, but this is
normal.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. A beeper will
sound and the LED will not light if a selection is
not allowed. See the Cycle Guide on page 15 for
details.
WASH/RINSE
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
• Use both hot and cold water supply for optimal
results.
SOIL LEvEL
Adjusts the selected cycle to allow
more faster agitation speed for
heavily soiled clothes or less slower
agitation speed for lightly soiled
clothes during the wash and rinse
course.
Press the SOIL LEVEL button until the
indicator light for the desired setting
is lit. You can choose between Light,
Normal or Heavy soil.
• The light will not show on this figure (▼).
20
Adjust to select the proper water
temperature for the wash cycle. It is
composed of washing temperature/
rinsing temperature.
• Your washer features a heating
element to boost the hot water
temperature for Extra Hot/Cold or
Hot/Cold settings.
• Select the water temperature
suitable for the type of load you are
washing. Follow the fabric care label
for best results.
SPIN SPEED
The washer drum spins at up to 1,100
RPM. This reduces drying time and
saves energy. Press the SPIN SPEED
button until the indicator light for the
desired setting is lit. You can change
maximum spin speed of spin cycle.
Some fabrics, such as delicates,
require a slower spin speed.
• If you select NO SPIN, the washer
turn off without spin cycle after
draining. (The cycle time will be
reduced by approximately 10
minutes.)
SPECIAL USE
Select any additional option, such
as RINSE+SPIN, SPIN ONLY, STAIN
CARE™ or SOAK
• If you press SPECIAL USE button
without selecting a cycle, COTTON/
NORMAL cycle with SOAK is
automatically selected.
NOTE: If you press SPECIAL USE
button 3 or 4 times, the cycle will
reset to COTTON/NORMAL.

ADD GARMENTS

Laundry may be added to the load at the proper
time in the wash cycle.
• ADD GARMENTS is automatically turned on
and off. You can not select it by pressing
SPECIAL USE button.
• If additional items are added during ADD
GARMENTS light is off, it may cause
unsatisfactory performance.
During ADD GARMENTS indicator light on.
Press START/PAUSE button to pause the
1
washer.
2
Open the lid after unlocked.
3
Add your additional items.
4
Close the lid.
5 Press START/PAUSE button to resume
the washer cycle. The washer will start
automatically.
NOTE: If the washer remains idle for 8 minutes
after pausing the cycle, the water in the tub will
drain.