Infosec E3 PERFORMANCE 800 RT IEC Guía De Usuario página 35

Step 4

Remove the top cover of
battery box and replace the
inside batteries.
Step 7

2-6 Battery Kit Assembly (option)
NOTICE: Please assemble battery kit first before installing it inside of UPS. Please select
correct battery kit procedure below to assemble it.
Step 1: Remove adhesive tapes.
Tapes
Step 3: Put assembled battery packs on
one side of plastic shells and insert one
more defect battery on the space.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 02 17 AA 59 204 40
Step 5

After replacing the
batteries, put the battery
box back to original
location and screw it
tightly.
Put the front panel back to the unit.
2.6.1 – 2 battery kit
Step 2: Connect all battery terminals by
following below chart.
Step 4: Cover the other side of plastic shell
as below chart. Then, battery kit is assembly
well.
Step 6

Re-connect the battery wires.
35