Faults Reference Code; Warning Indicators - Infosec E3 PERFORMANCE 800 RT IEC Guía De Usuario

3.7 Faults reference code

Fault event
Bus start fail
Bus over
Bus under
Inverter internal soft
start fail
Inverter internal
voltage high
Inverter internal
voltage high

3.8 Warning indicators

Warning
Low Battery
Overload
Battery is not
connected
Over Charge
Site wiring fault
EPO enable
Over temperature
Charger failure
Battery fault
EEPROM error
Battery replacement
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 02 17 AA 59 204 40
Fault
Icon
code
01 x
02 x
03 x
11 x
12 x
13 x
Icon (flashing)
Fault event
Inverter output short
Battery voltage too high
Battery voltage too low
Over temperature
Over load
Charger failure
Sounding every 2 seconds (At this time,
Fault
code
14
27
28
41
43
45
Alarm
Sounding every 2 seconds
Sounding every second
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
Sounding every 2 seconds
UPS is off to remind users of
something wrong with battery)
Sounding every 2 seconds
Sounding every 2 seconds
Icon
x
x
x
47