Style Function - Brother P-touch 2400 Manual Del Usuario

You can choose from eleven different character styles to apply to your text.
Characters printed using the smaller sizes may be difficult to read if certain style settings
(e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL
BOLD
OUTLINE
SOLID
SHADOW
ITALIC
The default style setting is NORMAL. The style indicators at the bottom of the display shows
the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
1 While holding down
current style setting.
2 While still holding down
displayed.
The current style setting is shown by the style indicators at the bottom of the dis-
play.
3 Release
Code Code
EXAMPLE
To select the I+SHADOW style setting:
1
While holding down
once, and keep
86

STYLE FUNCTION

I+BOLD (italic & bold)
I+OUTLINE (italic & outline)
I+SOLID (italic & solid)
I+SHADOW (italic & shadow)
VERTICAL
, press
Code Code
, continue pressing
Code Code
to apply the selected style setting to the text.
Code Code
Code Code
Style Style
once, and keep
$ $
4 4
Style Style
, press
$ $
4 4
held down.
Caps
held down to display the
Code Code
Style Style
until the desired style setting is
$ $
4 4
S T Y L E
Alt
N O R M A L
Length Length
Undl/Frm
A.Format
Width