Power Management System; Installation Connection To Your Computer; Controls; Osd Controls - Siemens Fujitsu MCM 171E Manual De Operación

Color monitor MCM 171E / C776

Power management system

This monitor complies with VESA, Nutek, and Energy Star power saving requirements. The
power saving system works only when used with VESA DPMS compliant PC's and/or graphic
controllers.
State LED
On Green
Stand by Green
Suspend Amber
Off Amber/Blink
The monitor goes into various power saving stages depending on the incoming
video signal as shown in the following table
State Horizontal Sync
On
Stnad by
Suspend
Off
Note : The monitor automatically goes through the DPMS steps when it is idle. To release the
monitor from the DPMS condition, press any key on the keyboard or mouse.
Installation
Connection to your computer
CAUTION
Ensure that both the PC and the display monitor are switched off.
To attach the monitor to your system, as shown in the
following illustrations.
1. Insert the AC power cord
2. Connect the signal cable
3. To turn on the monitor, push the power switch.
Note : To attach the monitor to the Macintosh system, please contact an authorized
dealer.(Need to use a special adaptor)
6 English
Power Recovery Time
Normal (75 Watts) N/A
60 Watts 2 Sec
15 Watts 5 Sec
5 Watts 15 Sec
Vertical Sync
On On
Off On
On Off
Off Off
into monitor and then
into an AC power outlet.
to the 15pin graphics
connector of the system and tighten the fastening
screws.
A26361-K598-Z100-2-5E19

Controls

OSD controls

"ON SCREEN MENU" controls include the following extended controls such as Size, Position,
Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved instantly. The
currently addressed control can be reset to factory settings by pressing the Reset button.
Function of OSD buttons on the front of the monitor
: In the main menu, exits the OSD controls. In a submenu, exits to the OSD main menu.
+
/
1) When no OSD on the Screen,
: Direct access to Brightness controls.
+
: Direct access to Contrast controls.
2) When Main menu is displayed. : Moves to function what you want to adjust.
3) When the Sub menu is displayed. : Controls the amount what you want to adjust.
MENU : Displays OSD main Menu.
1) When Main menu is displayed. : Selects function with RED ICON.
2) When Sub menu is displayed. : Selects function with RED ICON.
Additional front controls
Power Switch : Turns the monitor power on or off. When the power is on, the LED is on.
LED Power indicator Light : Located left side of the power switch and indicates the monitor's
power mode. Each mode reduces the amount of power used by the monitor.
Accessing on screen menu
Press MENU Button.
Turning off on screen menu
When in the main menu, press button.
When in submenus, press the button twice.
A26361-K598-Z100-2-5E19
Color monitor MCM 171E / C776
English 7