TASKPHONE T20 Manual Del Usuario página 19

Charging the battery - even wirelessly
Close one end of the supplied USB cable to the USB port
of the DC + 9V / 2A Adapter (fast charge) and the other
end of the USB cable connect and plug in the USB port of
the TASKPHONE
Then plug the DC + 9V / 2A adapter into the socket (AC
(180-240V). Charging begins.
The battery can also be charged by using the USB cable
directly to the USB port of the TASKPHONE
other end of the USB cable to the USB port of a computer
or to the in the vehicle connects. If the battery is low, the
screen shows „Battery is low xx left".
The TASKPHONE
Please charge the battery immediately.
The TASKPHONE
inductive charging the current is contactless, so through
the shell of TASKPHONES through, transferred to the
battery. This function makes it possible, the reload the
TASKPHONE
and to be independent of power connections.
Attention!
The TASKPHONE® and the battery should not be
thrown into the fire and not used in areas where the tem-
perature exceeds the specified values. This can lead to
the outbreak of a fire or cause the battery to explode. In
addition, this will result in a leak occurring and the func-
tionality will be significantly reduced or the TASKPHO-
NE® cannot no longer be used. If you are charging the
battery or when using the TASKPHONE, And you realize,
that the temperature of the case is unusual high, because
the battery has overheated, quit please the applications.
Do not charge the battery continuous for more than 24
hours. Should this precautions be disregarded, there is no
guarantee.
.
®
may not work as it should be used.
®
enables wireless charging. In this
®
on the way with the help of powerpacks
®
and the
®
19