Longshine 11n 1T1R Serie Manual De Usuario página 38

Items
IP Address
Subnet Mask
Default Gateway
DHCP Client Range
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
Active DHCP Client List
This is the window that pops up after clicking the
of IP address, MAC address and expire time of the DHCP clients that have connected with this
device.
Information
The IP of your Router LAN port (default 192.168.100.1).
Subnet Mask of you LAN (default 255.255.255.0). All devices on the
network must have the same subnet mask to communicate on the
network.
Enter the "IP Address" of the router in your network.
DHCP stands for Dynamic Host Configuration Protocol. It is a
protocol for assigning dynamic IP addresses "automatically".
This field asks you to specify the DHCP Client IP address range
(default 100~200). You can also click the "Show Client" button to list
those connected DHCP clients.
Note: in Router/Client mode, DHCP Server default setting is enabled,
however in AP mode, DHCP Server default setting is disabled.
38
Wireless 11n 1T1R Router
button. It shows the information