Longshine 11n 1T1R Serie Manual De Usuario página 40

WAN Access Type
MTU Size
Attain DNS Automatically
Set DNS Manually
Clone MAC Address
History MAC Table
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
1. Static Mode (fixed IP)
Items
IP Address, Subnet Mask and
Default Gateway
MTU Size
Wireless 11n 1T1R Router
Select the mode to access the WAN as Static, DHCP Client or
PPPoE.
To Enable the Maximum Transmission Unit of router setup. Any
packet over this number will be chopped up into suitable size
before sending. Larger number will enhance the transmission
performance.
Enter the MTU number in the blank to set the limitation.
If your DNS provided by ISP is dynamic, choose "Attain DNS
automatically.
To specify the Domain Name System (DNS). The DNS server
translates domain names into IP addresses. Enter the DNS
provided by your ISP in DNS 1 and DNS 2.
There are two ways to clone MAC address.
One way is directory input MAC address in text box. Maybe you
need to save the MAC Address, you can click 'Manual Add' button
and add it to "History MAC Table" for easily backup; another is
click 'MAC Clone' button, then it will copy the MAC address from
your network card in the computer.
Note: The 'History MAC Table' can save maximum three MAC
Addresses.
To Delete the MAC Address you add before, mark the check box
in the select item on the right hand and click the "Delete
Selected". If you want to delete all the MAC Addresses, click
"Delete All" to remove all of them.
Information
Fill in the IP address, Subnet Mask and Default Gateway
that provided by your Internet Service Provider (ISP).
To Enable the Maximum Transmission Unit of router
40