BlackVue B-112 Manual Del Usuario página 8

STEP 3
Plug the Output cable into the port labeled "Dashcam" on the battery pack.
STEP 4
Plug your dashcam's power plug into the cigarette lighter socket on the battery pack's
Output cable.
Note
To ensure good electrical contact you can use electrical tape to tape the plug and
socket together.
STEP 5
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power
cord.
Caution
Do not expose the product to direct sunlight and/or heat.
8
BLACKVUE