Rosewill R-W320-T Manual Del Usuario página 5

IR REMOTE CONTROL BENDER
5. Installation/Operation
Application 1: Use with IR bender only
Insert the plug of the IR probes [F] into the IR probes output connection [B]
at the back of the IR bender [A].
Install the IR bender flat on a horizontal surface within sight and reach of
your remote control (± 6m in ideal circumstances).
Lead the IR probes inside the cabinet and to the A/V equipment in such
way that a LED can be stuck onto the IR eye of each A/V apparatus. Test
the position of each LED first before sticking as this should be done
carefully and precisely.
Insert the plug of the PSU into the PSU input connection [D] at the back of
the IR bender. Only use the supplied PSU. Connect the PSU to the mains.
Use your remote control and point towards the IR bender within an angle
of ± 15° in all directions.
Application 2: Use with IR receiver extension
R-W320-T
5
User Manual