Comfort Glow ES4830 Instrucciones De Instalación Y El Manual De Propietario página 5

ASSEMBLY
ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or
change the bulbs, while it is plugged in.
ALWAYS attach the feet before using! NEVER plug in or operate this unit if the feet are not attached.
Lay stove (A) upside down on a padded surface with the underside accessible. Attach leg (B) to stove by
inserting the tab on the top of the leg (B) into the corresponding slot on the bottom of the stove (A). Insert
two screws (C) into predrilled holes and tighten securely. Repeat with remaining three legs.
OPERATING YOUR HEATER
Once the unit has been properly connected to a grounded electrical outlet, it is ready to operate.
Note: Ensure the circuit breakers for the power supply are turned on.
To access the control panel, slowly open the door located on the front of the heater.
~ 5 ~