Battery tool use and care
Recharge only with the battery charger
specified by the manufacturer.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create risk of
injury and fire.
When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws or
other small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
Liquid ejected from battery may cause
irritation or burns. If contact accidentally
occurs, flush with water. If liquid contacts
eyes, seek medical help.
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
Specific safety
• Always wear eye protection. The PowerLu-
ber can generate up to 10,000 psi
(689 bar).
• Use only Lincoln 1218, 1224, 1230 or
1236 outlet whip hoses. Grease injection
injuries are a very serious injury. Hold the
hose only in the area of the spring guard.
Avoid accidental starting. Be sure switch
is not depressed when inserting battery
pack.
• Replace the hose at the first sign of wear,
kink or damage to the outside jacket.
• Do not bend the hose so that it becomes
kinked.
• Do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enable better control of the
tool in unexpected situations.
• Use safety equipment. Always wear eye
protection.
• Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used
for appropriate conditions.
W a r n i n g
Do not use any hose that has not been
approved by Lincoln. Extreme pressure
may cause nozzle extension or whip
hose to burst.
Replace hose at first sign of wear, kinks,
or damage to outside jacket.
Follow whip hose instructions and
warnings. Failure to comply may result
in serious injury or death.
3
W a r n i n g
To reduce the risk of injury, the
user must read the instruction
manual.
Separate collection. This prod-
uct must not be disposed of
with normal household waste.
W a r n i n g
Grease gun can develop high pressure
up to 10,000 psi (689 bar). Use safety
glasses and gloves for protection during
operation. Keep hands clear of exposed
rubber portion of hose.
Service
Tool service must be performed only by
qualified repair personnel. Service or main-
tenance performed by unqualified personnel
may void warranty and result in a risk of
injury.
When servicing a tool, use only identical
replacement parts.