Krups TR5223 Manual Del Usuario página 12

– Select the desired thickness by turning the button (F).
A
B
V - CLEANING
– Refer to section III "Before first use"
VI - WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
– Check electrical connection and the start-up procedure.
– The appliance cannot operate without the platform (G).
What if your appliance still fails to work?
– If you have any product problems or queries, please contact our Customer Relations Team first for expert help and
advice:
HELPLINE:
0845 602 1454 – UK
(01) 4751947 – Ireland
or consult our website - www.krups.co.uk
VII - ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Setting slide thickness
Starting
– Pull the safety button (B) and while holding it, press the On/Off button
(A) with your left hand.
– As soon as the blade starts to turn, release the safety button (B) and
hold the On/Off button (A) down.
– Push the trolley (D) with your right hand to start slicing.
– As soon as the On/Off button (A) is released, the appliance will stop
automatically. The slicer will then only start again when you activate the
safety button (B) followed by the On/Off button (A).
– This is a safety device that prevents involuntary start-up of the appliance,
especially by children.
– After use, turn the slice thickness setting button (F) to minimum.
10