Publicidad
Idiomas disponibles
Idiomas disponibles
RJ45 for connection to
the video
entryphone system
equipment and cables are not powered.
1.
Connect any external push-button ( door call) to terminals 1 and 2 of the
terminal block.
2.
Connect any external load (max. 24V - 3A) to the relay output (terminals 2 and 3
of the terminal block).
3.
Connect the LAN network cable to the RJ45 port and wait about 1 minute until
the video entryphone has completed the initialisation operations.
before making the electric connections, make sure all the
120
outside button (call from
external switch button)
24V DC
1 2 3
general
load
Publicidad
