Fleck ELECTRONIC SXT Serie Manual De Uso página 16

1 - VALVE OPERATION
Service indicator:
- Valve in service: lighted icon
- Night regeneration: flashing icon
Information indicator, viewed in Diagnostic &
Error modes
Indicator in programmation mode
Flow indicator
Multiplication indicator: numbers shown have
to be multiplied by 1000
Time clock regeneration
The number of days between each regeneration cycle is preset. Once reached, regeneration is
triggered at the programmed time.
7 day time clock regeneration
The regeneration is based on the days of the week: Monday, Tuesday,... Sunday. The electronics
will trigger a regeneration based on the defined days of the week at the set time.
Metered regeneration
The valve calculates the amount of water it can soften between 2 regenerations based on the
exchange capacity (m
Immediate or meter delayed regeneration
As softened water is used, the remaining volume display will decrease until reaching its reserve
capacity (meter delayed regeneration) or until zero (immediate metered regeneration). When
this happens, regeneration is automatically triggered either straight away or at a preset time.
15
Regeneration button.
3 °tH) and inlet water hardness that are preset.
Value setting buttons.
ELECTRONIC SXT
E
N
G
L
I
S
H