Beurer NA 20 Instrucciones De Uso página 25

2� Position the selected silicone
attachment onto the tip of the
device� Ensure that the silicone
attachment is fully placed on the tip
of the head unit�
3� Check that the device is functioning correctly before inserting it in-
to the nose� To do so, briefly press and hold the ON/OFF button
4� Hold or place the child to be treated in an upright position or
in a position where they are leaning slightly back� Do not use
the device when the child to be treated is lying down�
Carefully guide the tip of the silicone attachment into the nostril
or against the nasal septum� The tip of the silicone attachment
does not need to be fully inserted into the nose�
5� Press and hold the ON/OFF button
switch on the device� Now suck the nasal
secretions out of the nose� Ensure that no
nasal secretions get inside the valve�
6� Repeat the process as necessary on the other nostril� Should the
child experience discomfort or pain, stop using the device imme-
During the treatment, hold the
device at an angle of 20° to 60°
from the face�
to
25
�