Air Inlet; Regular Maintenance - M7 QB-134 Manual Del Usuario

Maintenance:
1. Before connecting the air hose to this tool or after
operating, apply 4 or 5 drops of pneumatic oil into the
air inlet and run it for several seconds, referring this
operation to the attached picture.
2. Maintain this tool regularly by performing the same oiling
application every 3 to 4 hours of operation.
3. Do not lubricate tools with flammable or volatile liquids.
Use only the lubricant recommended by Mighty-
Seven or authorized dealers. Any other lubricant will
lead to reduce performance of the tool and permanent
damage. Whenever any unauthorized lubricant is used
by accident, flush it immediately with recommended
pneumatic oil.
4. Follow all the recycling laws of waste disposal once this
tool is no longer usable.
Grinding wheel replacing
Use the supplied spanners to replace.
4
Pneumatic oil

Regular maintenance

Regular lubricating:
Perform this lubricating with grease once a month.

Air inlet