Call Waiting Function; Calling A Number From Contacts; Adjusting Volume; Caller Id Function - Pantech Jest 2 Guia Del Usuario

If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three calls will
be disconnected.

CALL WAITING FUNCTION

If you are on a call and you receive another incoming call, you will hear a beep and the
caller' s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
1. To answer another call while on the phone, press the SEND Key
This places the first call on hold. To switch back to the first caller, press the SEND
Key again.

CALLING A NUMBER FROM CONTACTS

1. From idle mode, press the Key twice to unlock the keypad, then press the
Right Soft Key [Contacts].
2. Select the Contact entry and press the
phone number.
3. Press the SEND Key to place the call.
Selecting the Contact entry and then pressing the Send Key
Number of the Contact entry automatically.

ADJUSTING VOLUME

TO ADJUST THE MASTER VOLUME:
1. From idle mode, press the Key twice to unlock the keypad, then press the
Volume Keys / up or down.
2. Select one of the following options and press the
• All Sounds Off
• Alarm Only
36
.
Key [VIEW], then select the desired
will dial the Default
Key [SET] to save it.
• Vibrate Only
• Low / Medium Low / Medium / Medium High
Press the Volume Keys / up or down to adjust Earpiece volume during a call.

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone rings. If the caller' s
identity is stored in Contacts, the name appears on the screen. The caller ID is stored in
the Recent Calls menu.

VIBRATE MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate
Vibrate Mode:
1. Slide the phone up, then press and hold the Vibration Mode Key
activate vibration mode.
2. To deactivate vibration mode, press and hold the Vibration Mode Key

SPEAKERPHONE MODE

The Speakerphone feature lets you hear audio through the speaker and talk without
holding the phone.
1. To activate, press the Key twice to unlock the keypad, then press the
Speakerphone Key . To deactivate, press the Speakerphone Key

USING AUTO KEYPAD LOCK FUNCTION

When the slide is closed the Side Keys and the Directional Key
them, press any key on the external display with the phone in the closed position
"Press OK to Unlock" displays. Press the
/ High
to
.
again.
are locked. To unlock
Key to unlock the keypad.
01
02
03
04
05
06
07
37 36