Technical Data Table; Installation; Laws, Technical Rules And Norms; Electric Connection - Lotus PCD-64ET Manual De Instrucciones Para La Instalación Y El Uso

MODELS
DIMENSIONS cm
POWER SUPPLY
MAXIMUM ABSORPTION
MAXIMUM POWER
POWER SUPPLY CABLE
POWER SUPPLY
MAXIMUM ABSORPTION
MAXIMUM POWER
POWER SUPPLY CABLE
POWER SUPPLY
MAXIMUM ABSORPTION
MAXIMUM POWER
POWER SUPPLY CABLE
The data plate is on the front panel (see diagram in electric connection item) and has all the data necessary for the
connection.
When fitting, the appliance must be levelled using a spirit level; slight differences of level can be adjusted by screwing
or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessibile.
It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed
near walls, dividing panels, kitchen furniture, decorative finishings, etc. , these should be in flameproof material;
otherwise it is necessary to cover them with non-flammable material.
Above all, it is necessary to ensure that the fire prevention norms are observed.
The installation, starting up and maintenance of the appliance must be carried out by qualified personnel. All operations
done when installing must be carried out observing the norms in force.
The manufacturer declines all responsibility in the event of incorrect functioning due to wrong installation or
installation which does not comply with the norms.
Attention! In accordance with international rules,when connecting the appliance,an automatic device enabling the
disconnection of all contacts from the mains, must be installed above it; this device must have a contacts opening of at
least 3 mm.
Installation must be carried out observing the following norms:
- Safety prescription in force
- Installation prescription, ECI norms.
The appliance is supplied without the connection cable. To install the power supply cable, proceed as follows:
GB

TECHNICAL DATA TABLE

PCD-64ET PCQD-64ET
40x70x29 40x70x29
400V 2N 400V 2N
50/60Hz 50/60Hz
11,3A 11,3A
5,2 kW 5,2 kW
4x1,5 mm² 4x1,5 mm²
TRANSFORMATION
230Vac3 230Vac3
50/60 Hz 50/60 Hz
22,6A 19,6A
5,2kW
5,2 kW
4x2,5 4x2,5
mm² mm²
230Vac3 230Vac3
50/60 Hz 50/60 Hz
22,6A 22,6A
5,2 kW 5,2kW
3x2,5 3x2,5
mm² mm²
INSTRUCTIONS FOR INSTALLATION

INSTALLATION

LAWS, TECHNICAL RULES AND NORMS

ELECTRIC CONNECTION

IE
PCQD-68ET PCQD-84ET PCQD-88ET
PCD-68ET
80x70x290 80x70x29
400V 3N 400V 3N
50/60Hz 50/60Hz
23 A 23 A
10,4kW 10,4kW
5x2,5 mm² 5x2,5 mm²
230Vac3 230Vac3
50/60 Hz 50/60 Hz
29,9 A 29,9A
10,4 kW 10,4 kW
4x4 4 x 4 mm
mm²
19
400V 2N 400V 3N
50/60Hz 50/60Hz
17,39 A 34,78 A
8 kW 16 kW
4x2,5 mm² 5x6 mm²
230Vac3
50/60 Hz
30,12 A
8 kW
2 2
4 x 4 mm
230Vac
50/60 Hz
34,78 A
8 kW
3x6 mm²