Snom 870 Guia De Inicio Rapido página 9

Setting up and connecting the phone
Initializing and registering the phone
Please note: You will need the registration information received from your Internet service
provider or your network administrator - normally the phone or extension number, the
password, and the registrar.
After you have set up the phone and connected it to the network as shown on pages 2 - 3, the
phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network does not support
DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server from your Internet
service provider or your network administrator and enter them manually when you are asked to do so
on the display.
After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on After initialization, the phone will guide you through the basic settings. Scroll by tapping on
/ / (see Fig. 4 on page 9). Select and save an option by tapping the button (Fig. 5).
1. Language. The default is English.
2. Time zone. Show all time zones:
language is spoken:
3. Dial tone.
4. The display will show the "Welcome" screen: Press any key to log on.
5. Enter the account number and tap blue call context area to save.
6. Enter the registrar (see "Entering numerals, letters, and special characters", below) and save.
7. Enter the password received from your Internet service provider or administrator. Save. After 7. Enter the password received from your Internet service provider or administrator. Save. After
successful registration you will see the springboard (Fig. 1). Tap
identity (Fig. 2).
Fig. 1:
Entering numerals, letters, and special characters
Press any key or pick up handset.
Fig. 3:
Current input mode:
123: Numerals
abc: Small letters
: Capital letters
ABC
Tap blue context area to dial the number.
Entering letters, special characters and symbols
In input modes small and capital letters, press the alphanumeric key one or more times
quickly, with a pause after each character.
Special characters and symbols
"0" key": 1x = space ("˽"), 2x = underscore ("_"), 3x = 0
. Show only those time zones where the selected
.
snom 870 Quick Start Guide
: See pages 2 - 3.
to show confi gured
Fig. 2
Change input mode
Call lists
Delete character to left of cursor
Favorites
Contacts, LDAP directory
Internal phone directory
E
N
G
L
I
S
H
/
9