Technical Data - Optica 665 Manual De Instrucciones

LIGhTING
the lighting system consists of two halogen lamps of 20 W power each.
to replace a light bulb proceed as follows:
a) Using a flat tool or screwdriver prise the ring holding the halogen lamp glass (Fig. ) and,
holding it, remove to the outside.
b) Replace the bulb using a piece of cloth or paper for that purpose.
c) then reinstall the ring and the glass proceeding in reverse order.
Note: Make sure that you do not touch the halogen bulb to be installed with your bare
fingers!
III TEChNICAL DATA
characteristics
SiGMa
Supply voltage
Fan motor
Lighting
Number of grease filters
Fan speeds
Width [cm]
Depth [cm]
Height [cm]
outlet [ø mm]
capacity [m /h]
power consumption [W]
Noise level [dBa]
operational mode
colour
Hood type
ac 20V 50Hz
1
2x20W halogens
1

60
50
1,5 – 99
150 or 120
Max 620
160
Max. 5
Extractor or absorber
iNoX stainless steel, mat
English
27