Getting Started; Assembly Of The Vertical Press Pad - Shark Press & Refresh GS500 Serie Manual Del Usario

Getting Started

The Press & Refresh Garment Care System brings your fabrics back to life without a trip to
™
the dry cleaners! Shark ® Steam Technology provides continuous powerful vertical steam that deeply
penetrates fabrics and renews fibers.
The Wrinkle Eraser heat bar simulates the soleplate of an iron and presses the fabric for a crisp
™
finish. Press the Wrinkle Eraser directly onto the garment for a crisp finish. Hold the steam trigger for
™
continuous steam.
Not only great on garments, the Press & Refresh
upholstery, bedding, curtains and more!
The vertical press pad makes garment care easy! Simply setup the pad onto any door, hang your
garment and Press & Refresh !
™
g
a
b c d
e f
First things first, you need to
know what's in the box you
just opened:
a F abric Steamer with small g Vertical Press Pad
steam bonnet attached
h Support Rods (x2)
b Bristle Brush Frame
i Garment Hook
c U pholstery/Delicate Fabric
j Heat Protection Panels (x8)
Frame
k Velcro
d Lint Brush Frame
l Filling Flask
e U pholstery Steam Bonnet
*Note: Model GS500W also includes
f Delicate Steam Bonnet
1 Accessory Bag, a 2 oz. bottle of Linen
Water and a 1 oz. Stain Stick.
8 TOLL FREE: 1-800-798-7398
GS500_series_IB_ES_100616.indd 8-9
™ can be used anywhere around the home:
j
k
l
IMPORTANT: Always check
h i
the fabric care labels for
recommendations. Test the
fabrics for colorfastness in an
inconspicuous place such as
an inside seam. Some articles
of clothing are better steamed
from the underside.
IMPORTANT: When
assembling your fabric steamer,
there may be a little water in
Clips (x3) the water tank. This is because
™
we test all our fabric steamers
100% before you buy them, so
you get a quality Shark
product.

Assembly of the Vertical Press Pad

Fig. 1
Fig. 2
Assembly & use instructions:
1 S afely remove contents of the
Press & Refresh ™ Garment Care
System and lay them out on a
flat surface to see that you have
all the components to complete
the assembly.
2 R EAD ALL INSTRUCTIONS
BEFORE USING YOUR PRESS
& REFRESH ™ GARMENT CARE
SYSTEM.
3 O nly use water. To extend the
life of your Press & Refresh
Garment Care System, we
recommend using distilled
water if you live in an area with
hard tap water.
4 D o not add cleaning solutions,
scented perfumes, oils, or
any other chemicals to the
water used in this appliance
as this may damage the unit
or make it unsafe for use. Use
of any substances other than
manufacturer's recommended
® Steam accessories will automatically
void your warranty.
IMPORTANT: Always make 2
sure the fabric steamer is
UNPLUGGED from the electrical
outlet when not in use. Never
fill the water reservoir when the
unit is plugged in.
3
™
Assembling the vertical
press pad:
1
I nsert the garment hook into
the top of the vertical press
pad (Fig. 1). Insert one of the
support rods into the opening
on the side of the Vertical
Press Pad making sure that it
is inserted firmly into the hook
(Fig. 2). Do the same with the
other support rod from the
other side.
English
Fig. 3
T he Vertical Press Pad comes
asembled with heat protection
panels in the pockets on the
back. These panels protect your
door from heat damage and
should be in place at all times
during use.
S lip the webbing bands at the
top of the vertical press pad
over either side of any door
with the terry cloth side facing
away from the door. With
the door open, loop the band
around the corner of the door
and repeat on the opposite
side. Gently tug on the pad
to make sure it is secure and
shut the door completely to
ensure the Vertical Press Pad is
stable for pressing. Be careful
not to close the door on your
fingers. Adjust the straps on
the webbing to the appropriate
height for comfort (Fig. 3).
T IP: The straps can be adjusted
to fit any door using the buckle
to adjust the strap lengths.
www.sharkclean.com 9
10-06-16 11:46 AM