Rowenta HU522 Serie Manual Del Usaurio página 12

EN
The appliance is too
noisy
The mist suddenly
stops
coming out
The warm mist func-
tion doesn't produce
any warm humidity
The appliance does
not work with no
display on screen
There is abnormal
smell mist
Mist fog is coming out
from around nozzle
ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If this appliance uses batteries: help us look after the environment, by not throwing away your
used batteries.
Instead, bring them to anyone of the special battery collection points. Do not throw them away
with your household waste.
These instructions can also be found on our internet site www.rowenta.com.
This user manual is downloadable online.
For any product problems or queries, please visit our website : www.rowentausa.com
or contact our helpline on 1-800-ROWENTA (for US only)
For any product problems or queries (for Canada only), please visit our website : www.rowenta.ca
or contact our helpline on 1-800-418-3325 (Mon to Fri 8:30 am to 5:00 pm)
The appliance is unstable
There may be resonance in
water tank due to low water
level.
Programmed timer period has
run out.
The water level indicator is
blinking.
The target humidity level is
reached.
The product is in warm-up
phase.
The mist is too fine to feel the
warmth.
The room temperature is too
cold and the mist may cool
down too quickly.
There is no power supply.
It's first use of appliance.
The water used is dirty or has
rested too long in water tank or
water base.
There are apertures between
the nozzle, the cover and the
water tank.
Place the appliance on a flat and stable sur-
face.
Refill the water tank.
Turn your product on.
Refill the water tank.
Wait a few minutes till the end of the phase.
Increase the speed level.
Increase the speed level and Heat the room
up.
Plug in power plug in main sockets.
The smell will disappear after several mi-
nutes of use.
Clean the water tank and the water base
according to the Maintenance Instructions.
Reposition the cover and check if the nozzle
is well plugged in the cover.
12