Textron Tempo PE961 Manual De Instrucciones página 9

Dialing Features
PULSE
Pulse Dialing
Press PULSE, then press TALK.
The dialing mode will automatically return to tone-type dialing when the test set is removed from
the line or when the test set is switched off.
To mix pulse and tone dialing, select PULSE and dial the pulse digits. Then press
TONE and dial the tone digits (the
Note: If the dialing string is started in Tone mode, it is not possible to add Pulse digits.
The Last Number Redial feature (explained later in this section) will dial this number as a mixture
of pulse and tone digits.
To dial this number from memory (explained later in this section):
• setting the dialing mode to Pulse before pressing MEM will dial the number as a mixture of
pulse and tone digits
• setting the dialing mode to Tone before pressing MEM will dial the number as tone digits only
LNR/PAUSE
Last Number Redial / Pause
Immediately after going off-hook, press LNR (last number redial) to redial the dialing string from
the previous call.
When dialing, press PAUSE to insert a four-second pause in the dialing string.
STO MEM
Store and Memory
Both the PE950 and PE960 can store up to 10 telephone numbers, one under
each of the digits (0–9).
To store a telephone number:
1. While connected to a line and in the Talk mode, press STO.
2. Enter the telephone number.
3. Press MEM.
4. Press one of the digits (0–9).
In addition to digits, the memory will also store
To recall and dial a stored telephone number:
1. While connected to a line and in the Talk mode, press MEM.
2. Press the appropriate digit (0–9).
will not be dialed).
, , (flash) and (pause).
PE961
to select
9