Tabla de contenido
Publicidad
I/O Capabilities
The number of channels of analogue to digital and digital to analogue conversion provided by your Alpha-Link MX
unit depends on the model:
• Alpha-Link MX 16-4 provides 16 analogue inputs and 4 analogue outputs.
• Alpha-Link MX 4-16 provides 4 analogue inputs and 16 analogue outputs.
The Alpha-Link MX can operate at the following sample rates; 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz
and, if locked to an external clock source, it can also operate at a deviation of up to
this guide we may refer to the lowest set of sample rates (44.1kHz, 48kHz) collectively as 'Fs', medium rates (88.2kHz,
96kHz) – being twice the lowest set – as '2Fs' and the highest sample rates (176.4kHz, 192kHz) as '4Fs'.
Multiple Alpha-Link MX units (in any mix) may be connected to a
single MADI stream to increase the total analogue channel count
on the one MADI stream. Note that at all sample rates Alpha-Link
MX provides the full complement of analogue I/O and, dependant
on the MADI mode used (56- or 64-channel), this will impact on
the total number of channels available when running multiple units
on one MADI connection at sample rates higher than Fs (2Fs and
4Fs). The table below illustrates the maximal I/O count against
sample rate for a single model of Alpha-Link MX:
Qty
4
3
2
1
2
Max. I/O
Fs (64ch)
Fs (56ch) 2Fs (32ch) 2Fs (28ch) 4Fs (16ch) 4Fs (14ch)
64 + 16
64
48 + 12
48
32 + 8
32
16 + 4
16
MX 16-4
56
–
48
–
32
32
28
16
16
10% from these rates. Through
MX 4-16
Inputs
4
–
3
1
2
2
1
3
–
4
–
–
–
–
–
16
16
14
Outputs
64
16
52
28
40
40
28
52
16
64
–
–
–
Publicidad
Tabla de contenido
