Kenmore 125.22614610 Manual De Uso página 25

PROBLEM
Vacuum cleaner picks
up moveable rugs
®
-or- PowerMate
pushes too hard.
Light won't work.
Cord won't rewind.
Vacuum cleaner
leaves marks on
carpet.
POSSIBLE CAUSE
1. Wrong pile height setting.
2. Suction too strong.
1. Burned out light bulb.
2. Tripped overload protector
®
in PowerMate .
1. Dirty power cord.
2. Cord jammed.
1. Wrong vacuuming pattern.
- 25 -
POSSIBLE SOLUTION
1. Adjust setting.
2. Open suction control.
1. Change light bulb.
2. Remove any items that may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end
caps, then reset.
1. Clean the power cord.
2. Pull out cord and rewind.
1. See VACUUMING TIPS.