Power Sources; Clock Setting; Alarm Setting - Roadstar CLR-290D+ Manual De Instrucciones

trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and
remove all the batteries, then turn the power back on after a few seconds.

POWER SOURCES

AC POWER: You can power your clock radio by plugging the AC/DC power adapter
into a wall AC power outlet. Check that the rated voltage of your appliance matches
your local voltage.
Power ON/OFF: press [POWER] (12) on back radio to turn on or off.
SETTINGS
Selecting Modes: Press [MODE/MENU] (5) to select DAB or FM modes.
Volume Adjustment: Adjusting Volume with [VOL+/-] (6/10) to increase or decrease
the volume.
Selecting Stations: in DAB mode, press [STAT+/-] (7/9) button to browse stations,
Press [SEL] (8) to confirm. In FM mode, press and hold [STAT+/-] (7/9) to search sta-
tions. Or use [Preset] (4) button to access the saved preset stations.
Snooze Function: to snooze the alarm, press the top of the radio. The alarm will
sound again once the snoze time has elapsed.

CLOCK SETTING

The time will updated automatically. If you want set manually, see instructions below:
1. Turn on in FM or DAB mode;
2. Press and hold the [MODE] button (5) to access the system menu and select
TIME>SET TIME with [STAT– or +] (9/7) and [SELECT] (8) button;
3. Press the [STAT– or +] (7/9) buttons to set desired time (HH:MM) to adjust the
hour and minutes and confirm with [SELECT] (8) button;
4. Press the [STAT– or +] (7/9) buttons to set desired date (DD-MM-YY)to adjust
the date and confirm with [SELECT] (8) button;
When complete, SAVED will appear on the display.

ALARM SETTING

In Radio mode:
1. Press the [ALARM 1 or 2] (1/2) button, and press [SELECT] (8) to confirm. Di-
splay will start to flash "HH:MM";
2. Press the [STAT– or +] (7/9) to set desired time then press [SELECT] (8) to
confirm;
3. Press the [STAT– or +] (7/9) to set desired select the alarm mode (Buzzer or
Radio) then press [SELECT] (8) to confirm;
4. If selected RADIO, press [STAT– or +] (7/9) to select a station to wake up to
5. Press the [STAT– or +] (7/9) buttons to set desired Volume of the alarm, then
press [SELECT] (8) to confirm;
6. Press the [STAT– or +] (7/9) buttons to turn on or off the alarm. If done correctly,
« SAVED » will appear on the display.
Repeat step 1 to 7 for alarm 2 if desired.
To turn off Alarm, press Alarm 1 or Alarm 2 to completly stop.
To cancel an alarm altogether, press Alarm 1 or 2, and press [STAT+/-] (7/9) to can-
cel.
English 2