Battery Pack - Festool CT-F I Manual De Instrucciones Original

English
6.3

Battery pack

Connecting the battery pack to the mo­
bile dust extractor
► Activate the mobile dust extractor's
automatic mode (see the operating
instructions for the mobile dust ex­
tractor).
► If you have used the cordless power
tool already, ensure that the battery
pack's capacity indicator has gone
out so that you can connect it (in cer­
tain cases, this can take a few sec­
onds).
► Press the connection button on the
mobile dust extractor [2-1] or on the
remote control [1-1] once.
The LED on the mobile dust extractor
shows a slowly rotating flashing blue
36
light and the mobile dust extractor is
ready for connection for 60 seconds.
► Switch on the cordless power tool.
The mobile dust extractor starts up and
the battery pack is connected until the
mobile dust extractor is manually
switched off.
If a second battery pack is con­
nected to the mobile dust ex­
tractor, the connection to the
first battery pack is lost.
Disconnecting the battery pack from
the mobile dust extractor
To disconnect the battery pack from the
mobile dust extractor, take one of the
following steps: