Ventray MASTICATING JUICER El Manual Del Propietario página 5

HOW TO ASSEMBLE
STEP 1:
TOP-SET ASSEMBLY
Wash all parts except the base before first use.
Ensure that the compression silicone and silicone ring are assembled properly.
1 Firmly insert the compression silicone
into the slot below the pulp spout.
Juicer may leak if not assembled
properly.
2 Assemble the strainer into the rotation
wiper then place this assembly in to
the juicing bowl ensuring the white
dot on the strainer is aligned with
the white dot on the juicing bowl.
8 | ENGLISH
3 Place the juicing screw into the strainer.
Turn and press down on it until it clicks
into place.
The juicing screw needs to be
locked in place in order to close
the drum lid.
4
Place the drum lid on the juicing bowl
aligning the white dot on the drum
lid with the white dot on the juicing
bowl. Turn clockwise to close, aligning
the white dot on the drum lid with
the closemark .
STEP 2:
TOP-SET TO BASE ASSEMBLY
For easy assembly hold the drum lid
?
by grabbing the feeding tube and
turn clockwise as shown.
5 Place the bowl on the base so that its
grey arrow lines up wit the black arrow
on the base.
6 Open/Close mark on the top-set.
Juicer will not operate if parts are
not assembled properly.
7
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as show in the illustration.
ENGLISH | 9