Renault 3998 Manual Del Usario página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
5. Close the radio control and press button 'A' twice, check the
correct operation of the system. Do this operation standing by
the vehicle.
6. Dispose the old battery in the special containers.
6.3 - Loss of the radio controls
If radio controls are lost, deactivate the system with the emergency
PIN code. Refer to the emergency override (see chapter 4).
6.4 - Loss of the PIN code
As the PIN code enables access to the system, it should not be
left in the unattended vehicle as it can be used to deactivate the
system or to add new radio controls without authorization. In case
of loss it is possible to replace the PIN code with the following
procedure:
1. Disarm the system using the radio control.
2. Open a door, leave it opened during programming.
3. Turn the ignition "ON", and keep the control panel button
pressed.
4. Press button 'A' of the radio control untill the turn indicators
flash, indicating entry into programming.
5. Set up the new PIN code:
• Push the button on the control panel for the number of times
corresponding to the first digit of the new PIN code.
The led will blink everytime you press the button, a longer
blink will confirm that the right PIN code digit has been input.
Proceed in the same way for the further 3 figures.
• Turn the ignition OFF at the ackowlegement of the fourth digit.
• Repeat the new PIN code entry. If this PIN code is the same
as the previous the system will store it. The storage confirmation
is given by a 3 s blink of the turn indicators and of the LED.
To exit the program at any time, close the opened door and the
old PIN will not be modified.
User manual
GB
19

Publicidad

Tabla de contenido
loading

Tabla de contenido