Unpacking And Inspection; Items Supplied; Feature; Usage - Metcal BVX-200 Serie Guia Del Usuario

Unpacking and Inspection

1.3.
Carefully unpack the Fume Extraction System and examine the items contained in the Carton.
Inspect the unit for any damage that might have occurred in transit. If such damage is present, notify
the carrier immediately. Claims for damage must be made by the consignee to the carrier and should
be reported to the manufacturer.

Items supplied

1.4.
1 Filter Unit with filters installed
1 Remote start/stop switch
1 Power Cord
1 Operating Manual
Features
1.5.
On/Off switch with "soft-start" feature
Low noise level
High suction force and airflow
Compact and portable
Audible filter block indicator
HEPA Efficiency at 99.97% (Model BVX-201)
Deep-bed gas filter (Model BVX-203)
Connects to 50mm(2") or 63mm(2.5") hoses or
exhaust arms
ESD safe housing
UL & CSA listed, CE certified

Usage

1.6.
The Fume Extraction System is a portable, two-station filtration system for the removal of fumes, light
dust or vapors at the work place. The filter set supplied with the filter unit depends on the model
ordered.
Model BVX-201 supplied with a pre-filter and a main filter. The main-filter is a combo-filter consisting
of a HEPA filter with an efficiency of 99.97% at 0.3 micron and an activated carbon filter. This model
is designed for applications such as solder fumes from solder irons, solder pots, etc.
Model BVX-203 supplied with a pre-filter and a deep-bed gas filter (activated carbon). This model is
designed for applications such as cleaning with solvents, conformal coating, etc.
WARNING!
Consult your "safety department" when using the unit on flammable gases. This unit is not explosion safe
and only used for the extraction of vapors, which have concentration levels well below the lower explosive
limits.