Start Delay - COLUMBIA VAC KLC9100 Instrucciones De Uso

pressing the „C" button (the device returns to the factory settings after disconnection from
the power supply).
If another mode is activated, cooling is also switched on with the „H" button.
Cooling is indicated by the
The display „I" shows the temperature pre-set within the range 16°C to 31°C.
Use the „B" and „D" buttons to set the temperature.
The fan speed can be set by pressing the „G,F" button.
When using the dehumidification mode, the pipe discharging the air to the outside must
be connected to the unit to.
DEHUMIDIFICATION
Switch on the device with the „C" button.
Press the „J" button once.
The display „I" shows the „dh" symbol.
The humidity level is constant - it cannot be changed.
The fan operates only at
When using the dehumidification mode, the pipe discharging the air to the outside must
be connected to the unit.
FAN
In this mode, only the fan of the device works.
Switch on the device with the „C" button.
Press the „H".
The „FA" symbol appears on the „I" display.
Activation of the function is indicated by the
The fan speed ( /
To switch off, press the „H,J,K" button (change of operating mode) or the „C" button
(switching off the device).
SLEEP
Night mode only works in conjunction with the cooling mode.
The night mode is activated by pressing the „E" button. Activation of the function is
indicated by the indicator light. The display „I" shows the pre-set temperature. The fan
operates only at speed.
To deactivate the mode, press the „E" button again.

START DELAY

The device must be switched off, but connected to the power supply.
Press the „A" button - the digits on the „I" display will start blinking.
Using the „B" and „D" buttons, select the time within the range 1 to 24 hours.
After selecting the time, wait until the digits on the display stop blinking.
Activation of the function is indicated by the
To deactivate the function, press the „A" button twice.
When switched on, the air conditioner will operate in cooling mode according to the
previous temperature and fan speed settings.
•
22 EN
indicator light.
speed.
) is set by pressing the „G,F" button.
indicator light
indicator light.