Install The Slide Assemblies - Sun Microsystems Fire V480 Guía De Instalación Y Montaje

Install the Slide Assemblies

1. Use the Rack Alignment template to locate and mark mounting holes on the
vertical rack rails.
See "Locate the Mounting Holes" on page 8.
2. Adjust the back mounting bracket to accommodate the depth of the rack.
Loosen, or if necessary, remove the 8-32 lock nuts on the back mounting
bracket.
Adjust the back mounting bracket forward or backward on each slide assembly
to accommodate the depth of the rack.
en-10 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002
Back mounting bracket
8-32