Sun Microsystems Fire V480 Guía De Instalación Y Montaje página 16

4. If the depth of the rack is greater than 27.25 inches (69.21 cm), install a
Phillips 8-32 screw and an 8-32 lock nut on each back mounting bracket as
shown in the illustration.
5. Completely tighten all of the rackmounting screws.
a. Make sure that the slide assemblies are level front-to-back and left-to-right.
b. Tighten the eight 10-32 screws that secure the slide assemblies to the vertical
mounting rails.
en-12 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002